1-Factor
Card authentication in a compact contactless or industrial enclosure.
Explore 1-Factor →IDFactors / Access Readers
Authenticate the card.
Protect the entry.
PIV authentication for government and commercial access systems. Explore contact, contactless and dual-interface readers, from 1-Factor through Card + PIN + BIO.
Find your reader
The right authentication.
The right form factor.
Choose the authentication factors first, then the card interface and connection to your access system. EntryPoint and TrustPoint configurations are listed in each ordering table.
2-Factor
Card + PIN, with optional OLED messaging to guide the user.
Explore 2-Factor →3-Factor
Card + PIN + biometric verification for demanding access points.
Explore 3-Factor →01 / Card authentication
A stronger first point of entry.
The Series 73 contactless reader brings PIV authentication to government and commercial access points in a compact enclosure.
- On-board RSA-2048 CAK challenge-response for supported PIV credentials.
- Supports CAC, PIV, PIV-I, TWIC, PKOC and TrustPoint cards.
- Wiegand or OSDP configurations; field reflash from Wiegand to OSDP.
- Indoor or outdoor installation. Typical read range: 1.0 inch or more.
- PKI transaction time under two seconds, depending on the card.
Series 73 configurations and part numbers
| Interface | EntryPoint | With Prox | TrustPoint + HVM | With Prox + HVM |
|---|---|---|---|---|
| Wiegand | 73-01-3001-XX | N/A | 73-01-3001-XC | N/A |
| OSDP | 73-12-3001-XX | N/A | 73-12-3001-XC | N/A |
01 / Industrial reader options
Contact. Contactless. Or both.
Series 74 1-Factor readers offer contact-only operation for locations that do not allow RFID, contactless convenience, or a dual interface.
- Shutter-protected contact slot resists rain and debris.
- Card connector rated to 500,000 insertions.
- Heavy-duty polycarbonate enclosure for indoor or outdoor installation.
- Optional 125 kHz Prox module on listed contactless configurations.
Series 74 1-Factor configurations and part numbers
| Configuration | Interface | EntryPoint / standard | With Prox | With HVM | With Prox + HVM |
|---|---|---|---|---|---|
| Contact Only | Wiegand | 74-01-1001-XX | N/A | 74-01-1001-XC | N/A |
| Contact Only | OSDP | 74-12-1001-XX | N/A | 74-12-1001-XC | N/A |
| Contactless Only | Wiegand | 74-01-3001-XX | 74-01-3001-PX | 74-01-3001-XC | 74-01-3001-PC |
| Contactless Only | OSDP | 74-12-3001-XX | 74-12-3001-PX | 74-12-3001-XC | 74-12-3001-PC |
| Dual Interface | Wiegand | 74-01-2002-XX | N/A | 74-01-2002-XC | N/A |
| Dual Interface | OSDP | 74-12-2002-XX | N/A | 74-12-2002-XC | N/A |
02 / Card + PIN
Add a second factor.
Keep the interaction simple.
Series 74 Card + PIN readers combine a physical credential with PIN entry. Choose contact, contactless or dual-interface operation.
- Configurable PIN-to-card or PIN-to-panel operation.
- Shutter-protected contact slot on applicable models.
- Wiegand and OSDP configurations.
- Optional legacy Prox support on listed contactless models.
Series 74 2-Factor configurations and part numbers
| Configuration | Interface | EntryPoint / standard | With Prox | With HVM | With Prox + HVM |
|---|---|---|---|---|---|
| Contact + PIN | Wiegand | 74-01-1002-XX | N/A | 74-01-1002-XC | N/A |
| Contact + PIN | OSDP | 74-12-1002-XX | N/A | 74-12-1002-XC | N/A |
| Contactless + PIN | Wiegand | 74-01-3002-XX | 74-01-3002-PX | 74-01-3002-XC | 74-01-3002-PC |
| Contactless + PIN | OSDP | 74-12-3002-XX | 74-12-3002-PX | 74-12-3002-XC | 74-12-3002-PC |
| Dual Interface + PIN | Wiegand | 74-01-2003-XX | N/A | 74-01-2003-XC | N/A |
| Dual Interface + PIN | OSDP | 74-12-2003-XX | N/A | 74-12-2003-XC | N/A |
02 / Guided access
Clear instructions.
Right at the reader.
The Series 75 2-Factor reader adds a high-visibility OLED display. Messages can communicate threat levels, required factors and access instructions.
- Display adjusts to one, two or four lines.
- Contact, contactless or dual-interface configurations.
- Red, green and yellow status LEDs.
- Trusted signing certificates can be compiled into Wiegand readers or downloaded via OSDP.
Series 75 2-Factor configurations and part numbers
| Configuration | Interface | EntryPoint / standard | With Prox | With HVM | With Prox + HVM |
|---|---|---|---|---|---|
| Contact + PIN | Wiegand | 75-01-1002-XX | N/A | 75-01-1002-XC | NA |
| Contact + PIN | OSDP | 75-12-1002-XX | N/A | 75-12-1002-XC | NA |
| Contactless + PIN | Wiegand | 75-01-3002-XX | 75-01-3002-PX | 75-01-3002-XC | 75-01-3002-PC |
| Contactless + PIN | OSDP | 75-12-3002-XX | 75-12-3002-PX | 75-12-3002-XC | 75-12-3002-PC |
| Dual Interface + PIN | Wiegand | 75-01-2003-XX | N/A | 75-01-2003-XC | N/A |
| Dual Interface + PIN | OSDP | 75-12-2003-XX | N/A | 75-12-2003-XC | N/A |
03 / Card + PIN + BIO
Three factors.
One access point.
The Series 75 biometric reader combines credential authentication, PIN entry and biometric matching for higher-security installations.
- SecuGen FIPS-201 and FBI-approved biometric scanner.
- Supports CAC, PIV and TWIC cards, including TWIC private-key and contactless-biometric functions.
- OLED messaging programmable at the reader or through OSDP.
- Contact, contactless or dual interface; indoor or outdoor installation.
Series 75 3-Factor configurations and part numbers
| Configuration | Interface | EntryPoint / standard | With Prox | With HVM | With Prox + HVM |
|---|---|---|---|---|---|
| Contact + PIN + BIO | Wiegand | 75-01-5001-XX | N/A | 75-01-5001-XC | NA |
| Contact + PIN + BIO | OSDP | 75-12-5001-XX | N/A | 75-12-5001-XC | NA |
| Contactless + PIN +BIO | Wiegand | 75-01-5002-XX | 75-01-5002-PX | 75-01-5002-XC | 75-01-5002-PC |
| Contactless + PIN + BIO | OSDP | 75-12-5002-XX | 75-12-5002-PX | 75-12-5002-XC | 75-12-5002-PC |
| Dual Interface + PIN + BIO | Wiegand | 75-01-5003-XX | N/A | 75-01-5003-XC | N/A |
| Dual Interface + PIN + BIO | OSDP | 75-12-5003-XX | N/A | 75-12-5003-XC | N/A |
Specialist access readers
Authentication at the gate.
A TWIC, PIV and CAC gate terminal for ports, energy facilities and military installations. This access reader connects through Wiegand or OSDP; for an integrated standalone controller, explore EntryGate.
- Powder-coated structural steel enclosure with stainless-steel front panel.
- Key-operated quick disconnect supports removal and storage before extreme weather.
- Contact, contactless or dual interface with Card + PIN + BIO options.
- High-contrast OLED display and large status LEDs.
- OSDP 2.2 Secure Channel and Transparent Mode.
NEMA rating and TSA APL listing are marked pending in the supplied product document.
Gate terminal configurations and part numbers
| Configuration | Interface | EntryPoint / standard | With Prox | With HVM | With Prox + HVM |
|---|---|---|---|---|---|
| Contact + PIN + BIO | Wiegand | 75-01-9001-XX | N/A | 75-01-9001-XC | NA |
| Contact + PIN + BIO | OSDP | 75-12-9001-XX | N/A | 75-12-9001-XC | NA |
| Contactless + PIN +BIO | Wiegand | 75-01-9002-XX | N/A | 75-01-9002-XC | N/A |
| Contactless + PIN + BIO | OSDP | 75-12-9002-XX | N/A | 75-12-9002-XC | N/A |
| Dual Interface + PIN + BIO | Wiegand | 75-01-9003-XX | N/A | 75-01-9003-XC | N/A |
| Dual Interface + PIN + BIO | OSDP | 75-12-9003-XX | N/A | 75-12-9003-XC | N/A |
Reader security options
A hardware option for your deployment.
The optional Hardware Verification Module (HVM) is described as designed to meet FIPS 140-3 Level 3 and to accelerate RSA, ECC and post-quantum algorithms. Confirm the supported configuration and availability with IDFactors.
The ordering tables distinguish EntryPoint configurations from TrustPoint configurations with HVM. “Designed to meet” describes a design target, not a claim of completed certification.
Technical reference
Specifications without the guesswork.
General reader-family specifications from the supplied product catalog. Features vary by model; confirm your selected configuration before ordering.
| Government Cards Supported | PIV, CAC, PIV-I, TWIC (Private Key) |
|---|---|
| 13.56 MHz Cards Supported | Mifare/DESfire, FIDO, PKOC, TRUSTPOINT |
| 125 KHz Legacy Prox Support | Optional mode to read legacy HID Prox cards (26 and 37 bit) |
| System Support | All leading brands: PSG Global, Identiv/Hirsch, Lenel, Software House, AMAG, Andover, Sielox, Access Nsite |
| Standards Supported | ISO-7816, ISO-14443, FIPS-201, NIST 800-73 & 800-116, TWIC SC/QTL |
| PACS Interface | 20+ Wiegand Formats & OSDP 2.2 (Secure Channel and Transparent Mode) |
| Contactless Performance | Reliably Reads at 1.5 – 2.5 Inches <1.0 Sec. (with no PKI transactions) |
| Contact Performance | Landing Contacts Rated to 500,000 cycles. Shutter resists moisture and debris |
| Security Modes | 1, 2 & 3-Factor Models Available |
| Native PKI Algorithms | RSA-2048, AES 128 & 256, 3DES, RSA-4096, SHA-1, SHA-2 and RNG |
| Optional HVM | See hardware option above; configuration and certification status to be confirmed. |
| Power Management | Power-saving design; comparative measurement to be confirmed. |
| PIN Modes | PIN to Card, Pin to Panel and Pin only (pass-through) are supported |
| Output Ports | Standard terminal block or RS-485 Serial Port |
| Programming Input | PC ReaderConfig App via USB-B with optional Pin Code for security |
| Programmable Options | Format, Security Mode(s), PIN Mode, PKI Mode, Display Messages, Other |
| Biometric Module | Secugen sealed module / FIPS and FBI approved |
| OLED Display | Hi-visibility OLED Display dynamically resets message to 1, 2 or 4-lines |
| Construction | UL ABS/PC Housing with die-cast metal keys; UL 94 V0 |
| Mounting | Wall Plate, single or double-gang switch box |
| Connector Type | Terminal Block or RJ-45 Connector |
| Operating INPUT Voltage | 12V DC |
| User I/O | Piezo Buzzer plus Red, Green & Yellow LEDs, Tamper Switch, 4-line OLED |
| Operating Temperature | To be confirmed — temperature units in the source require clarification. |
| UL Listing | UL 294 |
| Controller Communication | Industry Standards Wiegand or SIA Standard OSDP 2.2 |
| Cable Distance | RS-485: 500 feet communication; AWG 18 or 22 (2 wires power and ground) |
| Low Power Mode | Minimum power duty cycle when not in use (detecting a card) |
| Enclosure | Lexan PC 940; UL V0 Flame and f1 for UV and moisture immersion |
Need mounting protection or enclosures? Explore installation support gear →
Let’s find the right configuration
Built around your requirements.
Tell us about your credentials, installation and access system. Our team can help with product selection, compatibility and pricing.
Contact salescustomerservice@idfactors.com